v2024 Assembly Instructions

Step 1: Remove Center Shelf

Remove the center shelf using four button head screws (two per side) with the provided 3mm Allen wrench.

Pro Tip: Shelf removal and installations are easiest when the shuttle is lying on its side.

Step 2: Set Shelf Height

Set shelf height using the locking ball stud on the front:

• Bottom position: Fits 9" and smaller screens
• Middle position: Accommodates ALL 10" models from major brands (Garmin, Humminbird, Lowrance)
• Top position: Suits Garmin 12" models (8612, 1243, 126 UHD)

Align screws with your chosen ball stud location.

Step 3: Remove Internal Computer/Battery Tray

Remove the internal computer/battery tray by extracting two button head screws on the shuttle's back using the 3mm Allen wrench. This tray can be removed with components attached.

Step 4: Install Battery Straps

Install velcro battery straps into slots matching your battery size. Alternatively, use sticky-back velcro for custom battery positioning.

Step 5: Install Computer

Install the computer using provided 1.25" Phillips head stainless bolts and nylock nuts.

Important: Bolts must pass from the back of the computer tray toward the front.

Step 6: Reinstall Computer/Battery Tray

Reinstall the computer/battery tray, reversing the process from Step 3.

Step 7: Install Gimbal Bracket

Install the Gimbal bracket on the center shelf using provided 3/4" bolts and nylock nuts.

Pro Tip: By reversing your gimbal bracket, you can gain additional room in front of your screen.

Step 8: Reinstall Shelf

Reinstall the shelf, reversing Step 1 instructions.

⚠️ Do NOT overtighten the screws, as this can damage your carbon fiber wrap.

Step 9: Cable Management

Follow wiring instructions and manufacturer guidelines for all cable plugs. Store excess transducer cord inside the box behind the screen.

Step 10: Go Fishing!

Your v2024 Aluminum Shuttle is ready for the ice. Protect your investment and catch more fish.